This just in from HRC:
Stoner tests Honda production racer after bad weather again causes delay
HRC test rider Casey Stoner today tested the Honda RC213V works machine currently racing in the MotoGP class, and the 'MotoGP Production Racer' as part of Honda's development tests at the Twin Ring Motegi Circuit in Tochigi, Japan.
Casey Stoner was unable to ride yesterday on the first day of scheduled testing, due to poor weather, but testing commenced as planned today under cloudy skies. In the morning, Casey tested the RC213V MotoGP works machine, and in the afternoon he also tested the Production Racer, a production model being developed based on the RC213V.
Despite it being his first ride on the test model, Stoner lapped the circuit with high average speeds worthy of the RC213V. Honda is developing the track-only Production Racer to enable teams and riders to race in the MotoGP class in 2014 with a reasonable budget.
At 15h45 local time bad weather once again brought proceedings to an end.
"Unfortunately the weather played a big role in this test which was a little frustrating not to be able to share the workload over the two days. We tried to do everything today but it was a little difficult, and we also had the threat of rain again. We started with the current model, trying to find a base setting and then work from there. We had two variations of chassis' to try and some big modifications and improvements in my opinion. We also tried the production bike which was more impressive than I predicted. It had a similar feeling to our current bike but with less power and different feeling in engine braking and chassis. With some small modifications I believe this bike will be competitive and I look forward to the next test with it! In general it was a good, but busy day!"